CL4Fire

Features and Benefits

Cl4Fire Code 96

GREASE Duct CODE-96™ Features & Benefits and CL4FIRE Ventilation Ductwork, Metal Piping and Fuel Piping Applications Benefits


CL4Fire Code 96™

The Only Ductwrap Product for Canadian Grease Ducts!


Canadian Codes Product Requirements and Features


CL4FIRE Code-96™ is the only product reviewed to meet all Canadian Building Code, NFPA-96 and Health & Safety requirements as determined the Canadian government building code engineers and specialists at the Canadian Codes Material Centre at the National Research Council of Canada.

CCMC Mandates Exterior Metal Mesh


CL4FIRE-96™ is a patent pending product with embedded metal mesh is the only product determined to meet building code & standards product durability and retention requirements. The CCMC has mandated an exterior metal mesh requirement.

ECO – Friendly


CL4FIRE CODE-96™ requires as little as half the amount of material for minimum 9” clearance to combustible materials and only needs two layers for a short distance when lesser clearances to combustible materials is required.

That is a lot less material to ship and a lot less carbon used to get the product to site.

Saves Money


Why spend money installing material that provides little benefit. Save material costs and installation costs while improving safety with the safety of exterior patent pending metal mesh embedded within the CL4FIRE CODE-96™ product.

Save Space


Thinner is always better when space is a concern. CL4FIRE CODE-96™ is the thinnest grease duct wrap system available in Canada. CODE-96TM also requires less storage space, and half the effort to move it to the installation location.

General Information


No other fire protection ductwrap product has been so thoroughly reviewed to match Canadian Building Code requirements, NFPA-96 Requirements and Health & Safety Requirements. Most Canadian products are only tested to ULC-S144 or ASTM E2336 which CCMC says is not enough to meet the Canadian Building Codes and Standards.

CL4Fire Red

CL4Fire Red

The Only Canadian Building Code Approved Ductwrap Product for Ventilation Ductwork, Metal Fuel Pipes or Other Metal Pipes


Canadian Codes Product Requirements and Features


CL4FIRE RED is the only ductwrap product reviewed to meet all Canadian Building Code and Health & Safety requirements for fire rating of metal ductwork and piping as determined the Canadian government building code engineers and specialists at the Canadian Codes Material Centre at the National Research Council of Canada.

FUEL Pipe Rated | Ventilation Duct Rated | Metal Pipe Rated


CL4FIRE is the only product evaluated to meet Canadian building code requirements and it is from a Canadian Company.

Upon examination of the Canadian Building Codes, you will find it contains no standards that outline requirements for providing a fire rating on Fuel Piping, Ventilation Ductwork or Metal Piping such as Sprinkler Headers. Why specify a product that does not meet Canadian requirements when you can get a better product that meets Canadian requirements from a Canadian Company.

Save Money


CL4FIRE applications are all designed to provide maximum protection for minimum product usage. Other companies attempt to get engineers to specify a high-cost non- Canadian Codes accepted standard for fuel piping. Save money while using the only approved Building Codes accepted systems.

General Information


No other fire protection ductwrap product has been so thoroughly reviewed to match Canadian Building Code requirements, and Health & Safety Requirements.

Safety, Value, and Supporting Canadian Business.

It does not get any better than this!